Toms Emacs Config - portable - version (20170628.01) -*-emacs-lisp-*-
-This is my emacs config, it is more than twenty years old. It @@ -462,11 +462,11 @@ outshine-to-html, written by myself, see below.
20160420.03: @@ -1228,13 +1228,14 @@ or inserts a % if not on a paren. Better than C-5, haha.
My emacs config has a version (consisting of a timestamp with a @@ -1266,11 +1267,11 @@ I'm using an outdated config somewhere.
since I always use ~/.emacs as my init file, this results in the @@ -1304,8 +1305,8 @@ all modes and extensions are located here
better visibility of cursor in console sessions @@ -1339,8 +1340,8 @@ better visibility of cursor in console sessions
I save backup files in a central location below the init dir, that @@ -1411,8 +1412,8 @@ This is system specific and only matches special host names.
make backspace work in console sessions @@ -1425,8 +1426,8 @@ make backspace work in console sessions
I prefer a bare bones emacs window without any distractions, so turn them off. @@ -1442,8 +1443,8 @@ I prefer a bare bones emacs window without any distractions, so turn them off.
(setq initial-scratch-message "") @@ -1456,8 +1457,8 @@ I prefer a bare bones emacs window without any distractions, so turn them off.
y is shorter than yes and less error prone. @@ -1470,8 +1471,8 @@ y is shorter than yes and less error prone.
very useful to know current column @@ -1484,8 +1485,8 @@ very useful to know current column
this can be seen in xmobar @@ -1499,8 +1500,8 @@ this can be seen in xmobar
(setq require-final-newline t) @@ -1510,8 +1511,8 @@ this can be seen in xmobar
where to look for extensions: @@ -1538,8 +1539,8 @@ modules
handy function to recompile all lisp files @@ -1554,8 +1555,8 @@ handy function to recompile all lisp files
I use those bindings everywhere (firefox, terminal, etc), and in @@ -1581,11 +1582,11 @@ emacs as well.
Very practical: resize windows easily. @@ -1602,8 +1603,8 @@ hit C-c C-r then use cursor keys to resize, <ret> to finish
(require 'windmove) @@ -1614,8 +1615,8 @@ hit C-c C-r then use cursor keys to resize, <ret> to finish
via mbork @@ -1695,8 +1696,8 @@ Use only in X11 emacs - setting M-O inside console causes <up> and
F5 == reload file if it has been modified by another process, shift @@ -1721,8 +1722,8 @@ because Xmonad
I use spaces everywhere but Makefiles. If I encounter TABs I @@ -1762,8 +1763,8 @@ Use normal tabs in makefiles
M-x q r <ret> is short enough for me, no need for key bindings for @@ -1795,8 +1796,8 @@ those
point stays while scrolling @@ -1849,8 +1850,8 @@ I'm grown up!
(define-key global-map [C-down-mouse-2] 'imenu) @@ -1860,8 +1861,8 @@ I'm grown up!
Related: @@ -1928,8 +1929,8 @@ marked region automatically copied, also on win
are you from the past? @@ -1942,8 +1943,8 @@ are you from the past?
Complete filenames case insensitive and ignore certain files during completion.
@@ -1973,8 +1974,8 @@ via
-
Do I really need those anymore? Added ca 1999…
@@ -1996,8 +1997,8 @@ Do I really need those anymore? Added ca 1999…
I dont need it all the time and only for experimentation, so lets
@@ -2039,8 +2040,8 @@ only use melpa on demand
narrowed fringe background
@@ -2053,8 +2054,8 @@ narrowed fringe background
Sometimes I need a text mode scratch buffer while scratch is
@@ -2070,13 +2071,13 @@ already in use. So let's prepare one
via emacswiki
@@ -2197,13 +2198,13 @@ more help with: describe-function occur-mode
I stole this somewhere, as far as I remember, emacswiki, however, I
@@ -2227,8 +2228,8 @@ always had F7 for goto-line
Sometimes when sitting in a very dark enviroment, my usual light
@@ -2271,8 +2272,8 @@ fast
Go to the beginning/end of a line, hit it twice in a row to go to
@@ -2336,8 +2337,8 @@ This is the most natural use for those keys
by Jens Heunemann: jump to percent position into current buffer
@@ -2358,8 +2359,8 @@ by Jens Heunemann: jump to percent position into current buffer
There's not a lot about vi[m] I like, but jumping with % to a
@@ -2391,8 +2392,8 @@ just insert a literal ?%. Only make sense if bound to %.
Mark a region, then use M-up|down to move it around
@@ -2491,8 +2492,8 @@ code from
-
via stackoverflow
@@ -2514,8 +2515,8 @@ via stackoverflow
Simulate the # function of vi, marks the symbol at point, C-s then
@@ -2559,8 +2560,8 @@ via ergomacs
Kinda screen reader for the poor. I use this sometimes with info
@@ -2586,8 +2587,8 @@ left+right margin on demand (but nothing else)
this is just a shortcut for:
@@ -2616,8 +2617,8 @@ idea via:
-
I just create a new read-only buffer and copy the contents of the
@@ -2666,8 +2667,8 @@ a file is not maintained via VC anyway.
From time to time I get annoyed by the many dozen buffers
@@ -2698,8 +2699,8 @@ setup accidentally.
Remove TABs, leading and trailing spaces, re-indent a buffer.
@@ -2729,8 +2730,8 @@ via whattheemacs.d
Add newline and jump to indent from wherever I am in the current
@@ -2764,8 +2765,8 @@ via whattheemacs.d<
There's not much use for the mouse in emacs, but this gimick is
@@ -2795,8 +2796,8 @@ via stackoverflow
via stackoverflow
@@ -2833,8 +2834,8 @@ usage samples below.
Try to eval 'fn, catch errors, if any but make it possible for
@@ -2856,8 +2857,8 @@ emacs to continue undisturbed, used with SMEX, see below.
align-regexp is already a very usefull tool, however, sometimes I
@@ -2907,8 +2908,8 @@ wrappers to make this easier.
Some helper functions I use here and there.
@@ -2947,14 +2948,14 @@ Some helper functions I use here and there.
Not much configured for python, I'm happy with the defaults as it seems :)
@@ -2998,8 +2999,8 @@ Not much configured for python, I'm happy with the defaults as it seems :)
I am a perl addict. I love it, therefore, emacs must be prepared
@@ -3146,8 +3147,8 @@ and hook them into cperl
I use paredit in lisp a lot, but are mostly happy with the defaults.
@@ -3190,8 +3191,8 @@ sometimes I need to be able to turn it off fast:
I use ETAGS for some projects. With etags I can easily jump to the
@@ -3268,11 +3269,11 @@ some handy aliases
Used for XML and the likes.
@@ -3299,8 +3300,8 @@ Used for XML and the likes.
Web development is shit. Tech involved is a mess, and in most cases
@@ -3394,8 +3395,8 @@ convert a text list into a html list.
Written by myself many years ago, but I'm still using it daily to
@@ -3413,8 +3414,8 @@ view and prepare cisco configs.
I rarely use markdown, but sometimes I stumble upon such a file and
@@ -3450,8 +3451,8 @@ parens and quotes constraints check on save
I LOVE POD! POD is the documentation format of perl and there's a
@@ -3560,8 +3561,8 @@ pod mode config
conf-mode annoyingly overwrites the global keybinding C-c C-c with
@@ -3582,8 +3583,8 @@ configs. Applies for derivates as well.
config-general-mode (also on Melpa).
@@ -3623,11 +3624,11 @@ enable outshine
One of the best modes I ever discovered. Press C-= multiple times
@@ -3646,8 +3647,8 @@ related to ER:
For a long time this stuff was located here in my emacs config. As
@@ -3750,8 +3751,8 @@ it appears as NNN,NN.
I use change-inner with a prefix key and some wrappers around
@@ -3873,8 +3874,8 @@ typing the prefix key twice calls the real change-inner
This one is great as well, I use it to toggle flags and such stuff
@@ -3930,8 +3931,8 @@ short command anymore, so C-t would be free now, wouldn't it?
same as word-wrap but without the fringe which I hate the most!
@@ -3953,8 +3954,8 @@ overwritten by visual-line-mode above for specifics
Delete stuff fast. Press the key multiple times - delete more
@@ -3972,8 +3973,8 @@ things. Inspired by expand-region. Written by myself.
extracted from debian package emacs-goodies-el-35.2+nmu1, since
@@ -3990,8 +3991,8 @@ the current buffer, however it looks.
Edit all occurences of something at once. Great for re-factoring.
@@ -4032,11 +4033,11 @@ behavior, so, I modify it myself using defadvice.
I am a hardcore bash user, but from time to time eshell is good
@@ -4316,8 +4317,8 @@ no need for less or more, this is emacs, isn't it?
General configuration for all things elisp.
@@ -4484,8 +4485,8 @@ same applies for quoted symbols
el2markdown is a module which
@@ -4509,8 +4510,8 @@ README.md. Take care though: it doesn't convert the META section.
Edit remote files, one of the best things in emacs. I use it every day heavily.
@@ -4532,8 +4533,8 @@ doku: gnu.org
I use org mode to take notes mostly at work. I also track projects
@@ -4834,8 +4835,8 @@ is in the outline section.
I'm so used to lovely org mode tables, I need them everywhere!
@@ -5081,8 +5082,8 @@ tables as well
Making presentations within emacs with org mode is cool as well.
@@ -5190,8 +5191,8 @@ Will be inserted as first help slide in a slide show
I maintain my emacs config with outshine mode. It works a lot like
@@ -5355,16 +5356,22 @@ posting online, which makes it way easier to read.
(emacs-lisp-mode)
(outshine-to-org)
(org-export-to-file 'html file))))
+
+(defun export ()
+ (interactive)
+ (outshine-to-html "~/D/github/dot-emacs/emacs.html")
+ (shell-command "cp ~/.emacs ~/D/github/dot-emacs/")
+ (shell-command "cd ~/D/github/dot-emacs && git ci +fixes .emacs emacs.html")
+ (shell-command "cd ~/D/github/dot-emacs && git push"))
I use the very same cycle style as in org mode: when on a heading,
@@ -5461,8 +5468,8 @@ orange fringe when narrowed
I use narrowing quite frequently, so here are some enhancements.
@@ -5502,8 +5509,8 @@ via
-
I use ansi term for inferior shells only.
@@ -5619,8 +5626,8 @@ finally the inferior REPLs:
adds hook for .pp files
@@ -5634,8 +5641,8 @@ adds hook for .pp files
my own emacs screen reader, very handy to read docs on the road.
@@ -5651,8 +5658,8 @@ my own emacs screen reader, very handy to read docs on the road.
see macro-math
@@ -5675,8 +5682,8 @@ mark something and hit C-x C-0 (which is a reminder to C-x C-= w/o the shift)
I'm learing CL with slime, start with M-x slime.
@@ -5709,8 +5716,8 @@ INSTALL: (see:
-
open an info file somewhere outside %infodir% with info-mode
@@ -5742,8 +5749,8 @@ easier navigation in Info mode, intuitive history back and forth.
emacs provides 4 ways to calculate:
@@ -5793,8 +5800,8 @@ or, inferior perl calc: M-x icalc, see above
help: emacswiki macro tricks.
@@ -6007,8 +6014,8 @@ but only load if in use
Emacs has a builtin browser, which is not too bad.
@@ -6076,8 +6083,8 @@ hides menus and distractions! Update emacs.
experimental: do things on save buffer etc.
@@ -6086,8 +6093,8 @@ Source: firestarter
built-in, used by many interactive major modes
@@ -6135,8 +6142,8 @@ we need to kill tablist's binding in order to have ours run (see below)
I even customize help windows! … at least a little :)
@@ -6160,11 +6167,11 @@ I even customize help windows! … at least a little :)
display matching braces
@@ -6185,8 +6192,8 @@ display matching braces
Absolutely needed!
@@ -6201,8 +6208,8 @@ Absolutely needed!
Better undo, with redo support.
@@ -6245,8 +6252,8 @@ M-_ catched by Xmonad
This is really cool and I don't know how I could ever live without it.
@@ -6269,8 +6276,8 @@ fails @win, so wrap it
display current function - if any - in mode line
@@ -6285,8 +6292,8 @@ display current function - if any - in mode line
You know the file you edited yesterday had "kri" in its name, but
@@ -6385,7 +6392,7 @@ exclude some auto generated files
There are other completion enhancement packages available like ivy
@@ -6524,8 +6531,8 @@ by howardism: [re]open non-writable file with sudo
So the next time I start emacs and open a file I were editing
@@ -6546,8 +6553,8 @@ before.
I'm not using it a lot, sometimes I tune the background color though.
@@ -6576,8 +6583,8 @@ cool ones: doremi-buffers, doremi-all-faces-fg+ [s, h]
not a mode, but however: higlight TABs in certain modes
@@ -6600,8 +6607,8 @@ not a mode, but however: higlight TABs in certain modes
when active use n and p to browse, <ret> to select, it's the same
@@ -6619,8 +6626,8 @@ as <M-y> and I never really use it…
Very handy, jump to last change[s].
@@ -6637,8 +6644,8 @@ Very handy, jump to last change[s].
I use the builtin bookmark feature quite a lot and am happy with
@@ -6670,8 +6677,8 @@ I use the same aliases as in apparix for bash (since I'm used to them)
One of the best unobstrusive modes for key help ever. Just start
@@ -6691,8 +6698,8 @@ press from there along with the associated functions.
iBuffer is a great interactive buffer management tool included with
@@ -6902,8 +6909,8 @@ override ibuffer M-o binding
overwrites printing default menu, access via menu File => Print
@@ -6948,8 +6955,8 @@ via
-
Source: beacon mode
@@ -6979,8 +6986,8 @@ editing position.
I just append the current version of my emacs config and leave out
@@ -7045,13 +7052,13 @@ custom modeline
Font color config, must always be the last thing so all hook faces are loaded.
@@ -7129,8 +7136,8 @@ unless we're on windoze
If I ever use custom-group to customize a mode, then I create a
@@ -7151,8 +7158,8 @@ here. So, in normal times this should be empty, but needs to exist.
Finally, this message is being displayed. If this isn't the case I
@@ -7169,7 +7176,7 @@ know easily that something went wrong.
3.24 abbreviations
+3.24 abbreviations
3.25 meaningful names for buffers with the same name
+3.25 meaningful names for buffers with the same name
3.26 packages
+3.26 packages
3.27 My own global variables
+3.27 My own global variables
3.28 More scratch space
+3.28 More scratch space
4 Global Key Bindings
+4 Global Key Bindings
4.1 c-h != delete
+4.1 c-h != delete
(keyboard-translate ?\C-h ?\C-?)
@@ -2091,8 +2092,8 @@ already in use. So let's prepare one
4.2 general keys (re-)mappings
+4.2 general keys (re-)mappings
(global-set-key (kbd "C-x C-4") 'set-selective-display-to-current-column)
@@ -2119,8 +2120,8 @@ already in use. So let's prepare one
4.3 display a list of my own global key bindings and aliases
+4.3 display a list of my own global key bindings and aliases
5 Productivity Functions
+5 Productivity Functions
5.1 goto line with tmp line numbers
+5.1 goto line with tmp line numbers
5.2 invert fore- and background
+5.2 invert fore- and background
5.3 Some useful bindings for Home and End keys Hit the key once to
+5.3 Some useful bindings for Home and End keys Hit the key once to
5.4 percent function
+5.4 percent function
5.5 Simulate vi's % function
+5.5 Simulate vi's % function
5.6 Move region
+5.6 Move region
5.7 comment-uncomment region with one key binding
+5.7 comment-uncomment region with one key binding
5.8 search for symbol at point
+5.8 search for symbol at point
5.9 Window Margin
+5.9 Window Margin
5.10 Fill and justify a paragraph
+5.10 Fill and justify a paragraph
5.11 Make a read-only copy of the current buffer
+5.11 Make a read-only copy of the current buffer
5.12 Cleanup, close all windows and kill all buffers
+5.12 Cleanup, close all windows and kill all buffers
5.13 Cleanup current buffer
+5.13 Cleanup current buffer
5.14 Better newline(s)
+5.14 Better newline(s)
5.15 Mouse Rectangle
+5.15 Mouse Rectangle
5.16 DOS <=> UNIX conversion helpers
+5.16 DOS <=> UNIX conversion helpers
(defun dos2unix ()
@@ -2814,8 +2815,8 @@ via stackoverflow
5.17 helper do add the same thing to multiple mode hooks
+5.17 helper do add the same thing to multiple mode hooks
5.18 helper to catch load errors
+5.18 helper to catch load errors
5.19 Alignment Wrappers
+5.19 Alignment Wrappers
5.20 String Helpers
+5.20 String Helpers
6 Modes
+6 Modes
6.1 Programming Languages
+6.1 Programming Languages
6.1.1 VALA
+6.1.1 VALA
(autoload 'vala-mode "vala-mode" "Major mode for editing Vala code." t)
@@ -2969,8 +2970,8 @@ Some helper functions I use here and there.
6.1.2 python mode
+6.1.2 python mode
6.1.3 cperl mode
+6.1.3 cperl mode
6.1.4 Paredit for lisp only
+6.1.4 Paredit for lisp only
6.1.5 ETAGS
+6.1.5 ETAGS
6.2 Text Modes
+6.2 Text Modes
6.2.1 sgml
+6.2.1 sgml
6.2.2 web-mode (JS, HTML, CSS combined)
+6.2.2 web-mode (JS, HTML, CSS combined)
6.2.3 Cisco Mode
+6.2.3 Cisco Mode
6.2.4 Markdown
+6.2.4 Markdown
6.2.5 POD mode
+6.2.5 POD mode
6.2.6 conf-mode
+6.2.6 conf-mode
6.2.7 Config::General mode
+6.2.7 Config::General mode
6.3 Text Manupilation
+6.3 Text Manupilation
6.3.1 expand-region
+6.3.1 expand-region
6.3.2 Mark, Copy, Yank Things
+6.3.2 Mark, Copy, Yank Things
6.3.3 change-inner
+6.3.3 change-inner
6.3.4 Rotate text
+6.3.4 Rotate text
6.3.5 Word wrapping
+6.3.5 Word wrapping
6.3.6 Viking Mode
+6.3.6 Viking Mode
6.3.7 HTMLize
+6.3.7 HTMLize
6.3.8 iEdit (inline edit multiple searches)
+6.3.8 iEdit (inline edit multiple searches)
6.4 Interactives
+6.4 Interactives
6.4.1 eShell stuff, or if interactive stuff is needed, use ansi-term
+6.4.1 eShell stuff, or if interactive stuff is needed, use ansi-term
6.4.2 Emacs LISP interactive
+6.4.2 Emacs LISP interactive
6.4.3 el2markdown
+6.4.3 el2markdown
6.4.4 tramp mode
+6.4.4 tramp mode
6.4.5 org mode
+6.4.5 org mode
6.4.6 org table mode
+6.4.6 org table mode
6.4.7 org mode slideshows
+6.4.7 org mode slideshows
6.4.8 outshine mode
+6.4.8 outshine mode
6.4.9 outline mode
+6.4.9 outline mode
6.4.10 narrowing (no mode but fits here)
+6.4.10 narrowing (no mode but fits here)
6.4.11 ANSI-TERM (inferior shells/interpreters and REPLs)
+6.4.11 ANSI-TERM (inferior shells/interpreters and REPLs)
6.4.12 Puppet
+6.4.12 Puppet
6.4.13 Novel Mode - Screen Reader
+6.4.13 Novel Mode - Screen Reader
6.4.14 Macro Math
+6.4.14 Macro Math
6.4.15 Common-Lisp (SLIME)
+6.4.15 Common-Lisp (SLIME)
6.4.16 INFO Mode
+6.4.16 INFO Mode
6.4.17 calc et al.
+6.4.17 calc et al.
6.4.18 MACROs
+6.4.18 MACROs
6.4.19 EWW browser stuff
+6.4.19 EWW browser stuff
6.4.20 Firestarter
+6.4.20 Firestarter
6.4.21 Tabulated List Mode
+6.4.21 Tabulated List Mode
6.4.22 Help Mode
+6.4.22 Help Mode
6.5 Emacs Interface
+6.5 Emacs Interface
6.5.1 Parens
+6.5.1 Parens
6.5.2 highlight todo keywords (such as FIXME)
+6.5.2 highlight todo keywords (such as FIXME)
6.5.3 UNDO Tree Mode
+6.5.3 UNDO Tree Mode
6.5.4 Smarter M-x Mode (smex)
+6.5.4 Smarter M-x Mode (smex)
6.5.5 Which Func
+6.5.5 Which Func
6.5.6 Show current-line in the Fringe
+6.5.6 Show current-line in the Fringe
(require 'fringe-current-line)
@@ -6305,8 +6312,8 @@ also change the color (matching the mode line
6.5.7 Recent Files
+6.5.7 Recent Files
(setq recentf-exclude (list "ido.last"
"/elpa/"
".el.gz$"
- 'file-readable-p
+ '(not (file-readable-p))
))
6.5.8 IDO mode
+6.5.8 IDO mode
6.5.9 Save cursor position
+6.5.9 Save cursor position
6.5.10 DoReMi experimentation
+6.5.10 DoReMi experimentation
6.5.11 Hightligt TABs
+6.5.11 Hightligt TABs
6.5.12 Browse kill-ring
+6.5.12 Browse kill-ring
6.5.13 goto-last-change
+6.5.13 goto-last-change
6.5.14 Bookmarks
+6.5.14 Bookmarks
6.5.15 which-key
+6.5.15 which-key
6.5.16 iBuffer mode
+6.5.16 iBuffer mode
6.5.17 Printing
+6.5.17 Printing
6.5.18 Beacon mode (pointer blink)
+6.5.18 Beacon mode (pointer blink)
6.6 mode-line setup (must be the last mode)
+6.6 mode-line setup (must be the last mode)
7 Emacs Autoconfig / Customizegroup stuff
+7 Emacs Autoconfig / Customizegroup stuff
7.1 font faces
+7.1 font faces
7.2 variables
+7.2 variables
7.3 done
+7.3 done