jaildk/README.md

## jaildk - a FreeBSD jail development kit

This is  the README for the  FreeBSD jail utility `jaildk`.  It can be
used to build, update, manage and run jails in a versioned environment.

Every jail  consists of layers of  directories mounted on top  of each
other using  nullfs mounts. Some  of them  can be shared  among jails,
some are versioned. By using shared  and versioned layers of mounts it
is easy to update jails in a  new version while the current version is
still running, you can switch back to an older version of a jail.

Most of the layers are mounted read-only for security reasons.

Let's take a look at the layers of a typical running jail built with `jaildk`:
```
     1  /jail/base/12.1-RELEASE-p10      /jail/run/db                       read-only
     2  /dev/md12                        /jail/run/db/tmp
     3  devfs                            /jail/run/db/dev
     4  /jail/log/db-20201026            /jail/run/db/var/log
     5  /jail/appl/db-20201026           /jail/run/db/usr/local             read-only
     6  /jail/etc/db/etc-20201026        /jail/run/db/etc                   read-only
     7  /jail/etc/db/local-etc-20201026  /jail/run/db/usr/local/etc         read-only
     8  /jail/etc/db/cron-20201026       /jail/run/db/var/cron
     9  /jail/home/db/root-20201026      /jail/run/db/root
    10  /jail/data/db/mysql-20201026     /jail/run/db/usr/local/data/mysql
    11  /backup/db                       /jail/run/db/var/backups
                                                     |
                                                     +--- root of the jail
```

As can be easily deduced this is a database jail with the following layers:

1. **base layer**: This is basically the same as a FreeBSD base, which
   contains all biinaries, libraries and  other files required to boot
   up a FreeBSD system. Our base  doesn't contain a kernel by default,
   but  you could  add one,  required  if you  want to  use the  ports
   collection and  compile `lsof` yourself.<br/>
   This  particular base  is  based on  12.1-RELEASE-p10,  that is,  I
   created it  while I had this  release installed and running  on the
   host system.
2. **tmp layer**: Just a ramdisk for `/tmp`, the size can be tuned.
3. **dev layer**: Contains /dev/null and friends, required by every jail.
4. **log layer**:  Here  we  have our  first  versioned layer  for
   `/var/log`. Notise how all other layers are using the same version,
   this  is done  by purpose  (but can  be changed  if you  like). The
   version is a jail variable (see  below) which is being used for all
   layers.
5. **application  layer**: As  you know if  you're using  FreeBSD, any
   additional software,  wether installed from  a port or  as package,
   will be  installed to  `/usr/local`.  In our  case it  contains the
   mysql  server  software,  bash  and  a  couple  of  supporting
   utilities. It is being mounted read-only, so no new software can be
   installed in the running jail.  This might sound annoying at first,
   because you can't  just install stuff inside the  jail anytime. But
   it  forces you  to  work more  disciplined. Once  a  jail has  been
   completely built  you can be  sure, all components match  with each
   other. Read below how to install or update software in a jail.
6. **/etc layer**: this just contains  the normal etc, it is basically
   a stripped copy of the host `/etc`.  We do not use it at all inside
   a  jail, but  it's required  nontheless. There  are some  exceptions
   however, like `/etc/resolv.conf`.
7. **/usr/local/etc layer**:  This  is the  place  we configure  all
   aspects of the jail, all configs  reside here (like in our case the
   mysql config). It  is also being mounted  read-only, just like
   the etc layer.
8. **cron layer**:  A writable mount for the crontabs  of users inside
   the  jail.  That   way  one  can  modify   crontabs  with  `crontab
   -e`. However, if you don't want or need this, just remove the layer
   and add cronjobs to `/etc/crontab`.
9. **/root layer**: most of the administrative work inside a jail must
   be done  as the  root user and  it would  be a pity  not to  have a
   writable  history. So,  `/root`  is mounted  writable  to add  more
   comfort.
10. **a data layer**: A versioned data layer which contains the binary
    data of our mysql server. This  is very jail specific and you have
    to add such layers yourself. Variants  of such a layer include the
    document root of a webserver or the repositories of a git server.
11.  **backup layer**:  Another  custom layer,  here  we've mounted  a
    global backup directory of our host which contains all backups.
    
All layers  are configured  in a `mount.conf`  file specific  for each
jail. The one for this jail looks like this:
```
base/$base                    $name                       nullfs  ro
md                            $name/tmp                   mfs     rw,nosuid,async  500m 1777
dev                           $name/dev                   devfs
log/$name-$version            $name/var/log               nullfs  rw
appl/db-$version              $name/usr/local             nullfs  ro
etc/$name/etc-$version        $name/etc                   nullfs  ro
etc/$name/local-etc-$version  $name/usr/local/etc         nullfs  ro
etc/$name/cron-$version       $name/var/cron              nullfs  rw
home/$name/root-$version      $name/root                  nullfs  rw
data/$name/mysql-$version     $name/usr/local/data/mysql  nullfs  rw
/backup/db                    $name/var/backups           nullfs  rw
```

Now, as you can see, we're  using variables here. Those are defined in
the  `jail.conf` (not  to  be confused  with  `/etc/jail.conf` on  the
host!):
```
name=db
version=20201026
base=12.1-RELEASE-p10
```

You might wonder  how the other aspects of a  jail are configured like
ip  addresses, routing,  jail  parameters, sysctls  etc. Well,  that's
beyond the  purpose of  `jaildk`.  You just  use the  standard FreeBSD
mechanism for these things,  that is `/ect/rc.conf`, `/etc/jail.conf`,
`service  jail ...`,  `jexec`,  etc. However,  `jaildk` provides  some
handy wrappers to make live easier.

For an overview of the provided commands, here's the usage screen:
```
Usage: jaildk <command> <mode-args>

Building Jails:
base      - build a new base
build     - install a build chroot of a jail
create    - create a new jail from a template
clone     - clone an existing jail or jail version
fetch     - fetch current port collection

Installing Jails:
install   - install a jail (prepare mounts, devfs etc)
uninstall - uninstall a jail
remove    - remove a jail or a jail version
reinstall - stop, remove, install and start a jail

Maintaining Jails:
start     - start a jail
stop      - stop a jail
restart   - restart a jail
status    - display a jail's status
rc        - execute an rc-script inside a jail

Managing Jails:
login     - login into a jail (also available as separate command)
blogin    - chroot into a build jail (dito)

Transferring Jails:
freeze    - freeze (build an image of) a jail
thaw      - thaw (install) an image of a jail somewhere else

Run the <command> without arguments to get usage help about the command.
```

## Installation

Execute the following command:
```
./jaildk setup <directory>
```

This will create the directory structure required for the tool install
the tool itself, create a template jail and build a base directory.

## Basic usage

Let's say you installed *jaildk* into `/jail` and you want to create a
new jail with  the name 'myjail' and the ip  address '172.16.1.1'.

The following steps need to be done:

### Configure /etc/jail.conf

Create the file `/etc/jail.conf` with the following innitial contents:
```
* {
    exec.start = "/bin/sh /etc/rc";
    exec.stop = "/bin/sh /etc/rc.shutdown";
    allow.raw_sockets = "false";
    sysvmsg = "new";
    sysvsem = "new";
    sysvshm = "new";
    host.hostname = $name;
    path = "/jail/run/$name"; 
    exec.prestart = "/jail/bin/jaildk install $name start";
    exec.clean = "true";
}

myjail {
    ip4.addr = "172.16.1.1";
}
```

Refer to [jail(8)](https://www.freebsd.org/cgi/man.cgi?query=jail&sektion=8) for more possible settings.

### Configure /etc/rc.conf

Next add the following lines to your `/etc/rc.conf`:
```
ifconfig_em0_alias0="inet 172.16.1.1/32"
jail_enable="YES"
```

You may need to replace the interface name `em0` with the one in use on your system.
You might need to restart the interface to apply the alias: `/etc/rc.d/netif restart`.

### Create the jail
```
# jaildk create myjail

- cpdup -x /jail/log/.template-20201106 /jail/test/log/myjail-20201106
- cpdup -x /jail/home/.template/root-20201106 /jail/test/home/myjail/root-20201106
- cpdup -x /jail/etc/.template/etc-20201106 /jail/test/etc/myjail/etc-20201106
- cpdup -x /jail/etc/.template/local-etc-20201106 /jail/test/etc/myjail/local-etc-20201106
/jail/data/.template/www doesn't exist, ignored
/jail/data/.template/spool doesn't exist, ignored
- cp -pRp /jail/etc/.template/mount.conf /jail/test/etc/.template/ports.conf /jail/test/etc/.template/mtree.conf /jail/test/etc/myjail/
cp: /jail/etc/.template/ports.conf: No such file or directory
Creating /jail/etc/.template/jail.conf
Creating run and build dirs
- mkdir -p /jail/run/myjail
- mkdir -p /jail/build/myjail
DONE.
Consider adding the jail myjail to /etc/jail.conf!

To mount the build chroot of the new jail, execute:
jaildk build myjail

To login into the build chroot
jaildk blogin myjail

To mount the production chroot of the new jail, execute:
jaildk install myjail

To login into the build chroot
jaildk login myjail

To start the jail, execute:
jaildk start myjail
```

### Mount the build chroot of the jail

```
# jaildk build myjail

Installing jail myjail
mount - mount -t nullfs -o rw /jail/base/12.1-RELEASE-p10 /jail/build/myjail
mount - mdmfs -o rw,nosuid,async -s 128m -p 1777 md /jail/build/myjail/tmp
mount - mount -t devfs dev /jail/build/myjail/dev
mount - mount -t nullfs -o rw /jail/log/myjail-20201106 /jail/build/myjail/var/log
mount - mount -t nullfs -o rw /jail/appl/default-20201106 /jail/build/myjail/usr/local
mount - mount -t nullfs -o rw /jail/etc/myjail/etc-20201106 /jail/build/myjail/etc
mount - mount -t nullfs -o rw /jail/etc/myjail/local-etc-20201106 /jail/build/myjail/usr/local/etc
mount - mount -t nullfs -o rw /jail/home/myjail/root-20201106 /jail/build/myjail/root
```

### Chroot into the build dir and install software

```
jaildk blogin myjail
pkg install bash nginx curl ...
vi /usr/local/etc/rc.conf
vi /usr/local/etc/nginx/nginx.conf
```

Since  the build  chroot  is  writable you  can  install packages  and
configure everything as needed.

### Using the ports collection

There might be cases when using pre build binary packages are not your
thing. In such a case you want to use the [FreeBSD Ports Collection](https://www.freebsd.org/ports/).

*jaildk* supports this, here are the steps required:

#### Create a buildbase

A  normal base  directory cannot  be  used with  the ports  collection
because  jaildk removes  libraries and  binaries for  security reasons
from normal bases. To create a build base, execute:

`jaildk base -b 12-RELEASE-build -w`

Next, add  the following entry  to the  configuration of you  jail. To
stay with our example, edit `/jail/etc/myjail/jail.conf` and add:

`buildbase=12-RELEASE-build`

Then install the build jail as usual:

`jaildk build myjail`

Install the current ports collection:

`jaildk fetch`

In case the  ports version created does not match  the version of your
jail, you need  to configure the different ports version  in your jail
config `/jail/etc/myjail/jail.conf` like this:

`ports=20201127`

Now you can enter the build jail and install ports the traditional way:

```
jaildk blogin myjail
cd /usr/ports/shells/bash
make config-recursive install clean
```

### When done, install and start the jail

```
# jaildk install myjail 
Installing jail myjail
mount - mount -t nullfs -o ro /jail/base/12.1-RELEASE-p10 /jail/run/myjail
mount - mdmfs -o rw,nosuid,async -s 128m -p 1777 md /jail/run/myjail/tmp
mount - mount -t devfs dev /jail/run/myjail/dev
mount - mount -t nullfs -o rw /jail/log/myjail-20201106 /jail/run/myjail/var/log
mount - mount -t nullfs -o ro /jail/appl/default-20201106 /jail/run/myjail/usr/local
mount - mount -t nullfs -o ro /jail/etc/myjail/etc-20201106 /jail/run/myjail/etc
mount - mount -t nullfs -o ro /jail/etc/myjail/local-etc-20201106 /jail/run/myjail/usr/local/etc
mount - mount -t nullfs -o rw /jail/home/myjail/root-20201106 /jail/run/myjail/root

# jaildk start myjail
Jail myjail start:
Starting jails: myjail.

# jaildk startus myjail
Jail scipown status:
 JID             IP Address      Hostname                      Path
 myjail          172.16.1.1      myjail                        /jail/run/myjail
Jail myjail rc status:
syslogd is running as pid 28180.
cron is running as pid 52130.
php_fpm is running as pid 45558.
nginx is running as pid 63975.
===> fcgiwrap profile: mediawiki
fcgiwrap is running as pid 37682.
```

### Login into the running jail for administration
```
# jaildk login myjail
```

You can use this to login into a database or execute commands inside the jail.


### Updating a jail

The very first thing to do is to update the host system using `freebsd-update`.

Next create a new base version:
```
jaildk base -b `uname -r`
```

Now you can create clone of your jail with a new version:
```
jaildk clone -s myjail -d myjail -o 20201106 -n 20210422
```

Mount the build chroot for the new version:
```
jaildk build myjail start -b `uname -r` -v 20210422
```

And finally chroot into the new jail and update it:
```
jaildk blogin myjail
pkg update
...
```

The last step is to remove the current running jail, change the version in `etc/myjail.conf`, install and start the new version.

If there's anything wrong you can always go back to the previous version using the above steps.


## Getting help

Although I'm happy to hear from jaildk users in private email,
that's the best way for me to forget to do something.

In order to report a bug, unexpected behavior, feature requests
or to submit a patch, please open an issue on github:
https://github.com/TLINDEN/jaildk/issues.

## Copyright and license

This software is licensed under the BSD license.

## Authors

T.v.Dein <tom AT vondein DOT org>
F.Sass (Culsu)

## Project homepage

https://github.com/TLINDEN/jaildk