rpnc/rpn.go

package main

var manpage = `
NAME
    rpn - Programmable command-line calculator using reverse polish notation

SYNOPSIS
        Usage: rpn [-bdvh] [<operator>]
    
        Options:
          -b, --batchmode       enable batch mode
          -d, --debug           enable debug mode
          -s, --stack           show last 5 items of the stack (off by default)
          -i  --intermediate    print intermediate results
          -m, --manual          show manual
          -c, --config <file>   load <file> containing LUA code
          -p, --precision <int> floating point number precision (default 2)
          -v, --version         show version
          -h, --help            show help
    
        When <operator>  is given, batch  mode ist automatically  enabled. Use
        this only when working with stdin. E.g.: echo "2 3 4 5" | rpn +

DESCRIPTION
    rpn is a command line calculator using reverse polish notation.

  Working principle
    Reverse Polish Notation (short: RPN) requires to have a stack where
    numbers and results are being put. So, you put numbers onto the stack
    and each math operation uses these for calculation, removes them and
    puts the result back.

    To visualize it, let's look at a calculation:

        ((80 + 20) / 2) * 4

    This is how you enter the formula int an RPN calculator and how the
    stack evolves during the operation:

        | rpn commands | stack contents | calculation   |
        |--------------|----------------|---------------|
        |           80 |             80 |               |
        |           20 |          80 20 |               |
        |            + |            100 | 80 + 20 = 100 |
        |            2 |          100 2 |               |
        |            / |             50 | 100 / 2 = 50  |
        |            4 |           50 4 |               |
        |            x |            200 | 50 * 4 = 200  |

    The last stack element 200 is the calculation result.

  USAGE
    The default mode of operation is the interactive mode. You'll get a
    prompt which shows you the current size of the stack. At the prompt you
    enter numbers followed by operators or mathematical functions. You can
    use completion for the functions. You can either enter each number or
    operator on its own line or separated by whitespace, that doesn't
    matter. After a calculation the result will be immediately displayed
    (and added to the stack). You can quit interactive mode using the
    commands quit or exit or hit one of the "ctrl-d" or "ctrl-c" key
    combinations.

    If you feed data to standard input (STDIN), rpn just does the
    calculation denoted in the contet fed in via stdin, prints the result
    and exits. You can also specify a calculation on the commandline.

    Here are the three variants ($ is the shell prompt):

        $ rpn
        rpn> 2
        rpn> 2
        rpn> +
        = 4
    
        $ rpn
        rpn> 2 2 +
        = 4
    
        $ echo 2 2 + | rpn
        4
    
        $ rpn 2 2 +
        4

    The rpn calculator provides a batch mode which you can use to do math
    operations on many numbers. Batch mode can be enabled using the
    commandline option "-b" or toggled using the interactive command batch.
    Not all math operations and functions work in batch mode though.

    Example of batch mode usage:

        $ rpn -b
        rpn->batch > 2 2 2 2 +
        = 8
    
        $ rpn
        rpn> batch
        rpn->batch> 2 2 2 2 +
        8
    
        $ echo 2 2 2 2 + | rpn -b
        8
    
        $ echo 2 2 2 2 | rpn +
        8

    If the first parameter to rpn is a math operator or function, batch mode
    is enabled automatically, see last example.

    You can enter integers, floating point numbers (positive or negative) or
    hex numbers (prefixed with 0x). Time values in hh::mm format are
    possible as well.

  STACK MANIPULATION
    There are lots of stack manipulation commands provided. The most
    important one is undo which goes back to the stack before the last math
    operation.

    You can use dump to display the stack. If debugging is enabled ("-d"
    switch or debug toggle command), then the backup stack is also being
    displayed.

    The stack can be reversed using the reverse command. However, sometimes
    only the last two values are in the wrong order. Use the swap command to
    exchange them.

    You can use the shift command to remove the last number from the stack.

  BUILTIN OPERATORS AND FUNCTIONS
    Basic operators:

        +                    add
        -                    subtract
        /                    divide
        x                    multiply (alias: *)
        ^                    power

    Bitwise operators:

        and                  bitwise and
        or                   bitwise or
        xor                  bitwise xor
        <                    left shift
        >                    right shift

    Percent functions:

        %                    percent
        %-                   subtract percent
        %+                   add percent

    Batch functions:

        sum                  sum of all values (alias: +)
        max                  max of all values
        min                  min of all values
        mean                 mean of all values (alias: avg)
        median               median of all values

    Math functions:

        mod sqrt abs acos acosh asin asinh atan atan2 atanh cbrt ceil cos cosh
        erf erfc  erfcinv erfinv exp  exp2 expm1 floor  gamma ilogb j0  j1 log
        log10 log1p log2 logb pow round roundtoeven sin sinh tan tanh trunc y0
        y1 copysign dim hypot

    Conversion functions:

        cm-to-inch
        inch-to-cm
        gallons-to-liters
        liters-to-gallons
        yards-to-meters
        meters-to-yards
        miles-to-kilometers
        kilometers-to-miles

    Configuration Commands:

        [no]batch            toggle batch mode (nobatch turns it off)
        [no]debug            toggle debug output (nodebug turns it off)
        [no]showstack        show the last 5 items of the stack (noshowtack turns it off)

    Show commands:

        dump                 display the stack contents
        hex                  show last stack item in hex form (converted to int)
        history              display calculation history
        vars                 show list of variables

    Stack manipulation commands:

        clear                clear the whole stack
        shift                remove the last element of the stack
        reverse              reverse the stack elements
        swap                 exchange the last two stack elements
        dup                  duplicate last stack item
        undo                 undo last operation
        edit                 edit the stack interactively using vi or $EDITOR

    Other commands:

        help|?               show this message
        manual               show manual
        quit|exit|c-d|c-c    exit program

    Register variables:

        >NAME                Put last stack element into variable NAME
        <NAME                Retrieve variable NAME and put onto stack

    Refer to https://pkg.go.dev/math for details about those functions.

    There are also a number of shortcuts for some commands available:

        d    debug
        b    batch
        s    showstack
        h    history
        p    dump (aka print)
        v    vars
        c    clear
        u    undo

INTERACTIVE REPL
    While you can use rpn in the command-line, the best experience you'll
    have is the interactive repl (read eval print loop). Just execute "rpn"
    and you'll be there.

    In interactive mode you can use TAB completion to complete commands,
    operators and functions. There's also a history, which allows you to
    repeat complicated calculations (as long as you've entered them in one
    line).

    There are also a lot of key bindings, here are the most important ones:

    ctrl-c + ctrl-d
        Exit interactive rpn

    ctrl-z
        Send rpn to the backgound.

    ctrl-a
        Beginning of line.

    ctrl-e
        End of line.

    ctrl-l
        Clear the screen.

    ctrl-r
        Search through history.

COMMENTS
    Lines starting with "#" are being ignored as comments. You can also
    append comments to rpn input, e.g.:

       # a comment
       123   # another comment

    In this case only 123 will be added to the stack.

VARIABLES
    You can register the last item of the stack into a variable. Variable
    names must be all caps. Use the ">NAME" command to put a value into
    variable "NAME". Use "<NAME" to retrieve the value of variable "NAME"
    and put it onto the stack.

    The command vars can be used to get a list of all variables.

EXTENDING RPN USING LUA
    You can use a lua script with lua functions to extend the calculator. By
    default the tool looks for "~/.rpn.lua". You can also specify a script
    using the <kbd>-c</kbd> flag.

    Here's an example of such a script:

        function add(a,b)
          return a + b
        end
    
        function init()
          register("add", 2, "addition")
        end

    Here we created a function "add()" which adds two parameters. All
    parameters are "FLOAT64" numbers. You don't have to worry about stack
    management, this is taken care of automatically.

    The function "init()" MUST be defined, it will be called on startup. You
    can do anything you like in there, but you need to call the "register()"
    function to register your functions to the calculator. This function
    takes these parameters:

    *   function name

    *   number of arguments expected (see below)

        Number of expected arguments can be:

            - 0: expect 1 argument but do NOT modify the stack
            - 1-n: do a singular calculation
            - -1: batch mode work with all numbers on the stack

    *   help text

    Please refer to the lua language reference:
    <https://www.lua.org/manual/5.4/> for more details about LUA.

    Please note, that io, networking and system stuff is not allowed though.
    So you can't open files, execute other programs or open a connection to
    the outside!

CONFIGURATION
    rpn can be configured via command line flags (see usage above). Most of
    the flags are also available as interactive commands, such as "--batch"
    has the same effect as the batch command.

    The floating point number precision option "-p, --precision" however is
    not available as interactive command, it MUST be configured on the
    command line, if needed. The default precision is 2.

GETTING HELP
    In interactive mode you can enter the help command (or ?) to get a short
    help along with a list of all supported operators and functions.

    To read the manual you can use the manual command in interactive mode.
    The commandline option "-m" does the same thing.

    If you have installed rpn as a package or using the distributed tarball,
    there will also be a manual page you can read using "man rpn".

BUGS
    In order to report a bug, unexpected behavior, feature requests or to
    submit a patch, please open an issue on github:
    <https://github.com/TLINDEN/rpnc/issues>.

LICENSE
    This software is licensed under the GNU GENERAL PUBLIC LICENSE version
    3.

    Copyright (c) 2023-2024 by Thomas von Dein

    This software uses the following GO modules:

    readline (github.com/chzyer/readline)
        Released under the MIT License, Copyright (c) 2016-2023 ChenYe

    pflag (https://github.com/spf13/pflag)
        Released under the BSD 3 license, Copyright 2013-2023 Steve Francia

    gopher-lua (github.com/yuin/gopher-lua)
        Released under the MIT License, Copyright (c) 2015-2023 Yusuke
        Inuzuka

AUTHORS
    Thomas von Dein tom AT vondein DOT org

`